Make your own circular saw slide jig
How to make a circular saw slide self-made jig
1. **Production of base units**
- Cut the plywood to the appropriate size and attach the slide rail.
- The use of an aluminum frame for the rail improves stability.
2. **Installation of a straight cut guide**
- Attach a guide with a scale to enable accurate straight cutting.
- Fix it with screws.
3. **Addition of angle adjustment function**
- Create a jig for 45° cutting and support the processing of wooden frames, etc.
- Install a free-angle jig to enable cutting at various angles.
4. **Safety measures**
- Install a stopper to prevent kickback.
- Use the clamp to fix the material so that you can work without holding it by hand.
5. **Finishing and adjustment**
- Adjust the spacing of the rails to achieve smooth sliding.
丸鋸スライド治具を自作
丸鋸スライド自作治具の作り方
1. **ベースユニットの製作**
- 合板を適切なサイズにカットし、スライドレールを取り付ける。
- レールにはアルミフレームを使用すると、安定性が向上する。
2. **直線カットガイドの設置**
- 目盛り付きのガイドを取り付け、正確な直線カットを可能にする。
- ネジで固定。
3. **角度調整機能の追加**
- 45°カット用の治具を作成し、木枠などの加工に対応。
- 自由角度治具を設置し、様々な角度でのカットを可能にする。
4. **安全対策**
- キックバック防止のため、ストッパーを設置。
- 材料を固定するためのクランプを活用し、手で押さえずに作業できるようにする。
5. **仕上げと調整**
- レールの間隔を調整し、スムーズなスライドを実現。