The front rotors are warped causing the steering wheel to shake when the brakes are applied. The brake hoses are dry rotted. The front rotors, brake lines, calipers and pads are replaced. The rear drums, shoes and brake line are also replaced. The manual locking hubs are inspected and lubricated.
00:00 Remove front caliper, pads and rotor
02:04 Remove, disassemble and inspect manual locking hubs
07:00 Replace front brake hoses
13:06 Paint brake calipers
15:15 Reassemble manual locking hubs
21:08 Install new front rotor, caliper and pads
24:57 Replace rear brake hose
28:06 Disassemble rear brakes
32:02 Reassemble rear brakes with new shoes and drums
39:44 Bleed brakes
41:37 Test drive