In this video. I give you tips on how I replaced the window regulator. I have already removed the interior panel. To remove that, First pull the molding off at the top where the mirror is. Then there are two Trox screws. One in the arm rest, the other behind the handle. then gentle insert something Flat. I used a large flat carpet nail puller. between the panel and the door. Lower corner and go around the edge gently popping the clips. then lift the panel off, discount the handle cable and the wire for the door light.
As I stressed in the video, be careful removing the window the regulator. Try to use your hand to pull the clip back, if you can't use a small screw driver to push the clip in and lift the window up. Two people makes this part easy, but can be done with one person.
When replacing the window, gently place it on the clips. Make sure they are aligned with the holes, and push down quickly, you don't want to put lots of stress on the window regulator.
Just take your time. I took me just under 2 hours, I broke it up into two sessions. The night before I had to get the window up , because the regulator broke in the down position!!!. The next day I got the regulator at a parts store for around $68. Then I replaced it.