Step by step guide for changing CVT Fluid on your Nissan Rogue! This guide can also apply to other Nissan Jatco CVT8 applications, as the CVT has been used on a wide variety of vehicles.
Things you'll need:
- Socket Wrench
- Breaker Bar
- 19mm or ¾ inch socket
- Dipstick (may need to be purchased, one used in video: https://www.amazon.com/dp/B08NWS8RSD?tag=affinity-siteplug-3-20&ascsubtag=srctok-8bcf225fbef25247&btn_ref=srctok-8bcf225fbef25247)
- 4 Quarts NS-3 CVT Fluid
- Small-necked funnel
Timestamps:
- 0:00 Introduction
- 0:32 About Taking Off the Fill Neck Cap...
- 1:32 Parts You'll Need
- 5:24 Frequency of Changing Fluid/Checking Manual
- 7:59 Instructions for Removing Fill Tube Cap
- 11:08 Checking Pre-Fluid Levels
- 13:02 Going Under the Car
- 15:10 Taking Off CVT Pan Bolt, Draining Fluid
- 16:39 Reinstall Drain Pan Bolt
- 18:19 Checking Drained Fluid Levels
- 19:20 Remove Fill Tube Cap... Again
- 19:53 Adding New CVT Fluid
- 20:45 Checking Fluid Levels
- 23:09 Test Drive
- 25:59 Final Fluid Check and Conclusion