Please take the time to Like, Share, Subscribe, and Comment.
Thanks for watching
Changing the front shocks on a 2017 Ford F-250 Super duty 4x4 involves several steps. Shock absorbers are crucial for vehicle stability, handling, and overall ride comfort, so it's important to perform this maintenance correctly. Here is a general guide to change the front shocks on your F-250:
Tools and Materials Needed:
New front shock absorbers (compatible with your F-250)
Jack and jack stands
Lug wrench
Socket set
Wrenches
Pliers
Penetrating oil (to loosen bolts)
Torque wrench
Safety glasses and gloves
Vehicle owner's manual
Procedure:
Safety Precautions:
Park your vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves for protection.
Ensure you have ample lighting and proper ventilation if working indoors.
Jack Up the Front of the Vehicle:
Using a suitable jack and jack stands, raise the front of the vehicle to provide access to the front suspension.
Remove the Front Wheels:
Use a lug wrench to remove the lug nuts from the front wheels.
Carefully take off the wheels and set them aside.
Locate and Access the Front Shocks:
Locate the front shock absorbers, which are typically located near the wheel wells.
Depending on the specific F-250 model, you may need to remove additional components like wheel liners for better access.
Remove the Upper Mounting Nut:
The upper part of the front shock is usually mounted to the vehicle's frame or shock tower with a mounting nut.
Use the appropriate socket and wrench to remove the upper mounting nut while holding the shock absorber to prevent it from spinning.
Remove the Lower Mounting Bolts:
The lower end of the shock absorber is connected to the suspension components.
Remove the lower mounting bolts securing the shock to the suspension components. These bolts might be tight, so apply penetrating oil if necessary.
Remove the Old Shock Absorber:
Carefully slide the old shock absorber out of its mounting points.
Be prepared for some resistance, as the shock may be under pressure.
Install the New Shock Absorber:
Insert the new shock absorber into its mounting points.
Reattach the lower mounting bolts and the upper mounting nut.
Tighten the Mounting Hardware:
Use a torque wrench to tighten the upper mounting nut and lower mounting bolts to the manufacturer's specifications.
Follow the torque values provided in the shock absorber replacement instructions.
Reinstall the Front Wheels:
Place the front wheels back onto the wheel hubs.
Hand-tighten the lug nuts onto the wheel bolts.
Lower the Vehicle:
Carefully remove the jack stands and lower the vehicle to the ground using the jack.
Tighten Lug Nuts:
Using a lug wrench, tighten the lug nuts in a crisscross pattern to ensure even pressure.
Consult your vehicle owner's manual for the recommended torque settings.
Test the Shocks:
Take your vehicle for a test drive to ensure that the new front shocks are functioning correctly.
Pay attention to the handling and ride comfort.
Always refer to your vehicle's owner's manual for specific instructions and torque values. If you're not comfortable performing this task, it's best to have a qualified mechanic or technician replace the front shocks on your 2017 F-250 Super Duty 4x4 to ensure they are installed correctly and safely.