## Video Description for Transmission Rebuild
This video provides a **step-by-step guide to rebuilding a 5R55E transmission**, a common automatic transmission used in Ford vehicles. The video is ideal for anyone looking to learn about transmission mechanics or who wants to rebuild their own transmission.
* The video begins by showing a **damaged 5R55E transmission** and identifying the **specific parts that need to be replaced**, including the sprag, bands, and pump washer.
* It then goes through the **process of disassembling the transmission**, cleaning the parts, and inspecting them for damage.
* The video highlights the **importance of using quality parts** and shows the difference between factory parts and aftermarket parts.
* It also provides **detailed instructions on how to assemble the transmission**, including how to install the pistons, springs, and snap rings.
* The video explains **how to check the clearances** of the transmission to ensure that it is properly assembled.
* It also includes **tips and tricks for making the rebuilding process easier**, such as using a foot press to install snap rings.
* The video **concludes by installing the valve body** and adjusting the bands.
**By watching this video, you will gain a thorough understanding of the 5R55E transmission and how to rebuild it.** The video's detailed instructions and expert tips will give viewers the confidence to tackle this challenging project.
* **Keypoints;**
* **Transmission Teardown:** Let's take a look at the damage to this 5R55E transmission.
* **Parts Overview:** Here are all the new parts we'll be using to rebuild this transmission, including bands, bushings, filters, and an overhaul kit.
* **Normal Wear and Tear:** Even a perfectly functioning transmission will show some signs of wear and tear.
* **Sprag Failure:** The sprag is a one-way clutch that can flip over if there is too much clearance, causing the transmission to stop moving.
* **Clutch Disassembly:** Watch as we carefully disassemble the forward drum and examine the damaged clutches and springs.
* **Friction Direction:** Make sure to install the frictions with the grain facing the correct direction.
* **Lip Seal Explanation:** Learn how lip seals work to apply pressure to the clutches.
* **Clearance Check:** We'll use a feeler gauge to check the clearance between the clutch plates and make sure everything is within spec.
* **Drum Assembly:** We'll assemble the forward, direct, and overdrive drums, making sure all the components are properly lubricated and installed.
* **Band Installation:** Installing the bands can be tricky, but we'll show you a technique that makes it easier.
* **Servo Installation:** We'll install the servos and adjust the bands to the correct specifications.
* **Valve Body Installation:** The valve body is the brain of the transmission. We've already installed a Transgo shift kit and torqued it to the correct specifications.
* **Final Assembly:** We'll install the valve body, filter, and pan, and then show you how to install the parking pawl.
* **Range Sensor Alignment:** The range sensor needs to be properly aligned in neutral to ensure proper shifting.
In addition to these captions, you can also add text overlays to your video to highlight important points or to provide additional information about the parts and procedures being shown.
**Keywords:** 5R55E transmission, transmission rebuild, automatic transmission, Ford transmission, DIY transmission repair, transmission parts, step-by-step guide, transmission repair, valve body, transmission bands, sprag, clutches, friction plates, pump, torque converter.