ABB RobotStudio for Beginner_Part 1
1. Create new Robot Station using the RobotStudio from Empty Station
2. Import ABB Robot from Robot library
3. Attach tool (AW_Gun) from Equipment tool library to the Robot
4. Create the Virtual Controller from Layout
5. Create Modeling Table from RobotStudio Modelling function
6. Jogging the Robot in joint move or linear mode from Freehand function
7. Create target using two method:
a) Teach target and
b) Create Target
8. Set Parameter setting (example ,move L/J, speed data, zone data)
9. Create Path
10. Transfer teaching point from Station to RAPID
11. Edit program from RAPID
a) putting Waittime,
b) change RobotSpeed, V
c) zone data, Z
d) Movement type, L OR J
12. Transfer from RAPID to Station
How to Position the Robot on Layout in RobotStudio: https://youtu.be/-kuWdyvbu1o
Palletizing Powerpac: https://youtu.be/w-el0M4Pxgc
Painting Powerpac: https://youtu.be/0TO4CJ5UVRg
Create a simple program from Flexpendant: https://youtu.be/hkn2l0waDfE
✔ Thanks for watching.😊
✔ Please do to Subscribe my channel👍👍👍 and like.❤