Adding a heavy duty switch to the router table

I finally added a proper switch to the router table. Probably not the best way to do it but it turned out great. It just took a lot of thinking and going to a few stores to find all the things that would work. This is the switch I used. Woodstock D4151 110/220-Volt... https://www.amazon.ca/dp/B005W17FRS?ref=ppx_pop_mob_ap_share These is the electrical box. https://www.homedepot.ca/product/red-dot-outdoor-rectangular-box-3-x-1-2-in-hole-silver/1000103785 And extension https://www.homedepot.ca/product/red-dot-4-hole-1-2-in-box-extension/1000856796 You will also need: - ring terminals - wire nut - 2” 6-32 pan head machine screws - 14 gauge extension cord - adhesive or a way to connect the electrical boxes - super heavy duty double sided adhesive tape or a way to mechanically attach the switch to the table - hole covers for the boxes. - zip ties I hope this helps with some ideas on how to add a heavy duty switch to your router table. Make/add this at your own risk.