AnyCubic hasn't started selling larger nozzles for many of their printers yet.
So I drilled out my own 0.6mm and 0.8mm nozzles!
I also made a few other upgrades. See the links Below.
Please Subscribe!
If you like what you see please buy me a coffee!
https://buymeacoffee.com/startupchuck
See my follow up video on making a 0.2mm nozzle!
https://youtu.be/RKkqJCvMteI
Nozzle Holder and profiles
https://makeronline.com/en/model/Kobra%203%20Max%20Nozzle%20Holder/174870.html
Camera Mount
https://makeronline.com/en/model/Corner%20Camera%20Mount%20for%20Kobra%203%20Max/174023.html
Purge Chute and Bucket
https://makeronline.com/en/model/Kobra%203%20Max%20filament%20purge%20chute%20and%20bin/173721.html
Make a printer profile for each nozzle(must be .6mm or .8mm to match the printer firmware)
Material flow rate was 21mm^3/s for PLA Plus and the 0.8mm nozzle
Print Profiles were as follows.
0.6mm nozzle - 0.3mm layer height and .62mm line widths
0.8mm nozzle - .4mm layer height and .82mm line widths
0.8mm nozzle - .6mm layer height and 1.23mm line widths - Love this setting.
Just a starting point. they could be refined.
#3dprinting #anycubic #diy