Installing the bobber kit
Set, bobber 77 31 2469290 1pc
Cable splitter bobber ECE (Bobber) 77 53 5A59EE3 1pc
LED turn signal and tail light comb. (Bobber) 77 51 5A59913 2pc
Adhesive pad reflector ECE (Universal) 77 31 5A6D636 1pc
Cable connector (0.2-0.5 mm²) 61 13 8353746 7pc
Shrinking hose (6x45mm) 61 13 5A4F528 7pc
Thread lock, medium-strength (10ml) 83 19 2210339 1pc
for USA
Set, bobber 77 31 5A1CBB7 1pc
Kit adhesive pads reflectors USA (Universal) 77 31 5A6B114 1pc
Cable splitter bobber USA (Bobber) 77 53 5A66382 1pc
Cable connector (0.2-0.5 mm²) 61 13 8353746 6pc
Shrinking hose (6x45mm) 61 13 5A4F528 6pc
Thread lock, medium-strength (10ml) 83 19 2210339 1pc
Select matching drill patterns for number plate on carrier plate:
A → Number plate 280 x 200 mm
B → Number plate 220 x 200 mm and 200 x 200 mm
C → Number plate 180 x 200 mm
Drill diameter carrier plate 4.5 mm
The cables of the multifunctional turn indicators and wiring harness must be connected in accordance with the following table:
Ground
Black (connect left and right) --- Brown
Turn indicator + left
Grey --- White
Turn indicator + right
Grey --- Black
brake light +
Grey/red (connect left and right) --- Red
Rear light +
Grey/white (connect left and right) --- Yellow
The cables of the multifunctional turn indicators and wiring harness must be connected in accordance with the following table: (USA!!!)
Ground
Brown --- Brown
Turn indicator/brake light/tail light
Blue --- Black (right)/white (left)
P.S The remaining cables of the additional wiring harness are not required.
Before connecting the cables firmly, check the function of the turn indicators with a temporary connection.
Cut the individual cables and their counterparts in staggered lengths by the approximate length of a heat shrink tube so that cable connections are not next to each other.
The cables of the number plate light and wiring harness must be connected in accordance with the following table:
Ground
Black --- Brown
Power supply
Red --- Blue