The #1 question I have been asked is "why did I use pinstripe tape instead of painting the thin stripes?". I'll answer this here...because this is the same way Eddie did it. The 1/8" pinstripes were eventually removed after a few tours. You can see evidence of the tape starting to peel in old photographs of Eddie's guitar. He removed all of the pinstripe tape before painting this with the red color. That's why the stripes are no longer visible on the guitar. Thanks for taking time to read this!
Chapters:
00:00 Introduction
00:59 Fender "Starcaster" overview
01:47 Primer and Body modifications
03:11 Spraying black lacquer
04:27 The taped stripes!
04:55 Sample boards
05:10 Spraying white lacquer
06:21 Peeling the tape
08:35 Neck sanding and fret leveling
12:29 Fitting brass nut and applying Tru-Oil
13:30 Apply conductive paint to cavity
14:30 3M Pinstripe application
17:21 Assembly / Wiring / Setup
24:37 Final reveal