S3E15: On this episode I walk you through the installation of the LMC5 from Compliance Parts, LLC and talk about the difficulty of the process. It is designed to fix the "service column lock" messages as well as the "pull key, wait 10 seconds" message. This is a common problem with the C5 era Corvette and should be verified by every owner or buyer that something has been done to fix the issue. Several recalls by GM have not fixe the problem, so you'll likely to have to fix it yourself.
2002 Chevrolet Corvette
Stock, Electron Blue
00:00 Intro
01:10 Install
05:40 Compliance Parts LMC5 Review
07:28 Outtro
#C5Corvette #Chevrolet #Corvette
Buy the module here: http://www.complianceparts.com/lmc5description.html
Description from Compliance Parts, LLC:
"The LMC5 is an easy to install module that completely simulates a perfectly functioning steering column lock system. This 100% solid-state module, with no moving parts, synchronizes with your C5's computer (BCM) every time you start your car. The LMC5 repairs and prevents virtually ALL column lock failures from disabling your Corvette, and prevents:
The SERVICE COLUMN LOCK message
The PULL KEY, WAIT 10 SECONDS message
The 2 MPH fuel cut-off.
Over 126,000 Corvettes have been recalled for this column lock problem, but these recalls DID NOT permanently fix the problem.
The LMC5 can be installed in ANY 1997-2004 Corvette, makes no permanent modifications to your Corvette, and requires NO removal or alteration of any recall procedures or any other column lock replacement device!
Simply install the LMC5 in the passenger footwell, and your column lock problems are gone! You NEVER have to do any time-consuming and frustrating dash disassembly, circuit testing, relay checking or any other diagnostic procedures!"