LINKS TO PARTS BELOW!
Here are the rotors, conversion hubs, brackets, spindles, and brake hoses you will need to upgrade to 1st gen Cts-v brembo's.
Calipers are factory 1st gen Cts-v calipers. These can be found at any parts store, dealer, or used online. Mine came off a 2007 car I bought from a member on Ls1tech.
I'm running C6 Z51 Corvette rotors, but as you can see the pad does hang over the rotor a bit. You can resolve this by using these modified 5th gen rotors from bigbrakeupgrade.com, or by grinding down the over hanging bit of pad. I would recommend using the 5th gen rotors, as I will be changing over to these as well.
14 Inch 5th gen ss standard rotors:
http://bigbrakeupgrade.com/product/camaro-ss-cts-v-standard-rotors/
Cross drilled version:
http://bigbrakeupgrade.com/product/camaro-ss-cts-v-slotted-rotors/
Conversion Hubs:
http://bigbrakeupgrade.com/product/ls1-conversion-hubs/
Conversion Hub/Spindle Assembly:
http://bigbrakeupgrade.com/product/camaro-ctsv-partial/
You can also send your spindles out to be modified if you don't want to do it yourself:
http://bigbrakeupgrade.com/product/modify-spindles/
CTS-V caliper brackets:
http://bigbrakeupgrade.com/product/camaro-ctsv-conversion-brackets/
Brakes Hoses:
http://bigbrakeupgrade.com/product/earls-stainless-braided-hoses/
Music:
TAKE THE CHANCE by Nicolai Heidlas Music https://soundcloud.com/nicolai-heidlas
Dreams by Joakim Karud https://soundcloud.com/joakimkarud
Day After Day by Joakim Karud http://soundcloud.com/joakimkarud
Hold On by Joakim Karud https://soundcloud.com/joakimkarud
By The Croft by Joakim Karud https://soundcloud.com/joakimkarud
Rock Angel by Joakim Karud https://soundcloud.com/joakimkarud