Hi guys,
This is an Ebay intercooler setup on my NP300! after hitting the snag of the clip style fitting I wanted to blow my ute up.. good thing I didn't cause it turned out minnnnnt!! not only does it look insane but the benefits of running a top mount are great! the old low mount was full of mud causing high intake temps! this will stop that from happening in the future! also is a much larger core so we should see much better temps across the board!
SUPPORT THE CHANNEL
* You can contact me Via Instagram/Email for merchandise we have hoodies, T-Shirts and Stickers available.
Instagram: Roam_Lyfe
Email: thomas.apps.93@hotmail.com
* Make a one-time donation on PayPal - https://www.paypal.me/roamlyfe
We love making YouTube videos, but it takes time to film and edit material for you to enjoy. If you enjoy our free videos and would like to help us produce fresh content, please consider supporting, making a one-time donation via PayPal, or contacting us to purchase some of our products. Our videos will continue to be free to watch on YouTube, and there is no obligation to help at all. But any support offered is greatly appreciated and goes directly into creating better content for you to enjoy. Thank you! - Tom & Alicia
thanks to Chris and Alicia for helping!!
I have attached photos of the current setup has been working great since getting the pipes welded!
THIS IS THE DIAGRAM I HAVE MADE - HOPE THIS HELPS!!
https://ibb.co/tCBxx9g
Parts List:
HOT SIDE:
1 x 2" straight pipe
2 x 2" clamps
1 x 2" x 2.5" Silicon Reducer
COLD SIDE:
1 x 2.25" x 2.5 Silicon Reducer
1 x 2.25" clamp to suit
Pipe Kit:
https://www.ebay.com.au/itm/2-5-INCH-64MM-ALUMINUM-TURBO-INTERCOOLER-PIPING-KIT-UNIVERSAL-PIPES-CLAMP-BLUE/263420722374?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Intercooler:
https://www.ebay.com.au/itm/Turbo-V-Mount-FMIC-INTERCOOLER-610x280x76mm-For-Mazda-RX7/120725390093?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649