I made a Mini Chud Box! Added some personal twists to Chud's BBQ design. This was made from leftover 3/16" HR pickled & oiled plate I had from the larger Chud Box I made in the last smoker video. This was a lot of fun and the thing cooks like a champ! A friend suggested I add trim to all the weld seams for a unique look and I'm really happy I did! Took a lot longer to build due to this but the end result is worth it in my opinion. Descriptions and tools used are below. Thanks for watching!
Shout out to Bradley Robinson at Chud's BBQ!
https://www.chudsbbq.com/
https://www.youtube.com/watch?v=t1EiUeQN0Q4
Dimensions:
Plate used is 3/16" (7ga) HR P&O
Corner trim is 1.5" x 1/8" angle
Flat trim is 1.5" x 1/8" flat bar
24" wide x 18" deep x 28" deep (Cooking chamber)
20" standoff between coal bed and cooking surface
8" standoff from cooking surface to lid
18" deep x 14" wide shelf
Air intake opening dimensions- 2.75" tall, 6" wide
Disclaimer: I have no sponsors nor do I get any kickbacks or benefits whatsoever if you purchase any of these items. I only wanted to share what was used in the video.
Metal and Evolution 15" Cold Saw purchased from Coremark Metals in Minneapolis
https://www.coremarkmetals.com/
Welder and Plasma Cutter
https://yeswelder.com/products/mig-welder-mig205
https://yeswelder.com/products/cut-55ds
Bandsaw is a Wen 5" metal cutting bandsaw.
https://www.amazon.com/WEN-3975T-8-inch-Metal-Cutting-Benchtop/dp/B07VK2DYRB/ref=sr_1_1?crid=3Q0QCA3KQ3V7D&dchild=1&keywords=wen+5+bandsaw&qid=1608489819&sprefix=Wen+5%22+band%2Caps%2C343&sr=8-1