I was searching online for a dual graph mount and came to find out they want roughly 300-800 dollars for a dual graph mount on top of not knowing if it will fit your boat. So that lead me to todays video where I used 28 dollars in metal from my local Alro steel outlet store and a 20 dollar powder coat job from first choice powder coat here in Michigan. To come to a total of 48 dollars for a truly custom mount for a humminbird Xplore 12 and Xplore 10 for my Lowe stinger 188. I used 1/8 inch thick by 3inch wide flat stock steel and 1/8 inch thick by 3 inch tubing for the support the Xplore 10 sits in.If you have a Lowe stinger with a factory built in trolling motor foot pedal tray the base of the mount where the Xplore 12 sits is 4.5 inches tall, 13 inches across to make it over the foot pedal tray, 2 inch feet on the mount to have something to bolt to the boat deck. The Xplore 10 is 10 inches back including the 3 inches of metal where the Xplore 12 sits, then sits 4.5 inches taller than the Xplore 12 including the 1/8th inch of thickness for the top plate the Xplore 10 sits in which is 13 inches wide. Thanks for watching as always make sure to subscribe so you don’t miss the next video of me installing it and testing it.