In this video I show you how I built my MFT style outfield/assembly table. The links below show where you can find the materials to build one yourself.
Some of these nuts and bolts you could find just have around the shop or could pick up at the big box store.
2” x 1” T-Slot rails: https://www.mcmaster.com/47065T107 You will need 4 of these (I used 2 4’ and 2 3’ lengths)
1” x 1” T-Slot rail: https://www.mcmaster.com/47065T101 You will need 1 of these (I used a 3’ length)
Corner bracket set (STL files to print on your own): https://www.etsy.com/listing/789200136/stl-files-for-diy-mft-brackets?ref=listings_manager_grid
T-Slot bolts: https://www.mcmaster.com/47065T139 You will need 24 of these (Order 6 packs of 4)
T-Slot nuts: https://www.mcmaster.com/47065T905 You will need 18 of these (Order 1 pack of 25)
Bolts for MDF support rails and attaching MDF top to corner brackets: https://www.mcmaster.com/91251A542
1/4-20 nuts to attach MDF top to corner brackets: https://www.mcmaster.com/95462A029
1/4 inch washers for MDF support rails: https://www.mcmaster.com/90107A029
Screws to attach corner brackets to base cabinet: https://www.amazon.com/Kreg-SML-C125-250-Coarse-Thread-Number/dp/B01E1E8AJ8/ref=sr_1_2?dchild=1&keywords=kreg+pocket+screws&qid=1590043884&sr=8-2
Contact me at tetonwoodshop@gmail.com if you have any questions.
Instagram @tetonwoodshop