Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
0:00 - The definitive guide to getting started with ExpressLRS
0:44 - What is ExpressLRS and why do people use it?
ExpressLRS website: https://www.expresslrs.org
Log on to the ELRS Discord server at: https://discord.com/invite/dS6ReFY
4:34 - Download and install ELRS Configurator
Download ELRS configurator at: https://github.com/ExpressLRS/ExpressLRS-Configurator/releases
5:47 - Identify the hardware "target" that you're working with
8:33 - Download and install the ExpressLRS Lua Script
11:59 - Configure your controller to work with your ELRS module
13:18 - ELRS receiver wiring and FC configuration
14:17 - ExpressLRS doesn't handle binding like you expect
How to bind ELRS without using binding phrase: https://youtu.be/H5OnozIqJCA
16:30 - Setting basic ELRS options before flashing
17:31 - Flashing Method 1: ELRS Passthrough
19:08 - Flashing Method 2: USB plug on module
CP210 driver download: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
21:05 - Flashing Method 3: Wifi direct-to-module
24:36 - "Targets Mismatch" error?
25:30 - Flashing Method 4: Connect to home WiFi
28:42 - Flashing Method 5: Wifi direct-to-receiver
30:46 - Flashing Method 5: Betaflight pass-through to receiver
31:58 - How to un-brick your receiver or module: FTDI flash
For instructions about flashing your receiver via pass-through and FTDI: https://www.expresslrs.org/2.0/quick-start/receivers/axis-thor/
32:26 - ELRS settings: Packet Rate
33:41 - ELRS settings: Telemetry Ratio
34:18 - ELRS settings: Switch Mode Hybrid vs. Wide
35:28 - ELRS arm switch MUST be Aux1 high = armed
36:01 - ELRS settings: TX Power
36:39 - Modules with screen and joystick can change settings there
36:50 - There is a LOT more to learn!