Thank you for clicking on this video! I hope you enjoy the content.
Below I have provided links to everything you may need in order to do this on your own.
If you like what you do please consider liking the video and subscribing to the channel. You can also leave a comment to let me know what you think of my work. I appreciate your time and thank you for spending it on this channel!
Steel bushing OD=22/ID=18/H=10mm
Aliexpress - https://www.aliexpress.com/item/1005007067773867.html
eBay - https://www.ebay.com/itm/204379368073
Brass bushing as used in the video OD=22/ID=18/H=10mm
eBay - https://www.ebay.com/itm/266386460600
Dayi 2106 Electric wrench head shell (this item has the impact mechanism and 1/2" anvil) Before purchase make sure the seller ships the entire head assembly!
Aliexpress - https://www.aliexpress.com/item/1005006770828460.html
eBay - https://www.ebay.com/itm/226232447958
7 tooth gear
Aliexpress - https://www.aliexpress.com/item/1005006076743370.html
eBay - https://www.ebay.com/itm/225609895566
New bearing - needed size OD=26/Id=15/H=5mm - unable to be found online. Closest to this isze is a 26*15*7mm bearing, however that might be too thick. On the other hand the original bearing has an Id of 17mm, the Id that we need with this conversion is 15mm. An option would be to do as I did and use something as a bushing to fill in that gap. Links to the bearing I used or a bushing that needs to be cut down to size can be fownd below.
Bushing 15x17x11 - https://www.aliexpress.com/item/4000283650260.html
Bearing used in the video (only inside of the bearing was removed and used a bushing) - https://www.aliexpress.com/item/32841996606.html
If the bushing does not fit snugly I advise that adhesive is used to secure it to one of the parts.
Important! With the impact mechanism from Dayi 2016 you can replace the original impact mechanism and leave the original anvil if you wish to do so! The Dayi 2106 impact mechanism is for an anvil with a 8mm opening at the bottom, same as the Parkside original anvil!
I intend no copyright infringement with the parts of the video that I use for the enhancement of the viewing experience.