Welcome to part 3 of the total beginners course to FreeCAD 0.20. In this lesson we will refine our basic part design model by learning more about constraints and sketcher tools. We will understand how to model on two planes and finally create a technical drawing of our pat. We are still following a part design workflow and learning the fundamentals of using the sketcher to create constrained sketches. In doing so we are simplifying the actions needed to create our model. This with a basic introduction to TechDraw workbench will help teach the fundamentals of freeCAD using the basics but delivering via teaching you different workflows.
In one lesson you may be learning how to sketch and build a model but will also be following a workflow that will take through the part design workbench all the way to exporting it out in STL format. In another lesson you may be learning how to model in the part workbench to see the differences between it and the part workbench but you will be following a workflow that will allow you to create 2D plans of your model to laser / paper cut.
We aim to teach you freeCAD in a practical way.
Please follow the playlist at: https://youtube.com/playlist?list=PLWuyJLVUNtc0UszswD0oD5q4VeWTrK7JC
to keep up to date with the video releases.
#FreeCAD , #CAD , #Python , #3D , #3DPrinting, #CNC
Journey with me and
Patreon
https://www.patreon.com/mangojellysolutions
Donate:
https://ko-fi.com/mang0
Subscribe:
https://www.youtube.com/channel/UCUWhaOxsRk_5oPPq00_Y7Dw?sub_confirmation=1
Browse my Redbubble Shop:
http://MangojellyLabs.redbubble.com