0:00 intro
0:51 printing
2:14 Assembly
5:12 About springs
6:32 Assembly
14:32 Final
Giveaway Conditions (a physical copy from this video):
Be subscribed to the channel
Like the video
Write any comment
The giveaway results will be announced on May 1st.
Shipping of the prize will be at my expense.
STL files: https://alexgeekwork.shop/product/power-fist-stl/
Physical copy: https://alexgeekwork.shop/product/power-fist-not-painted/
Springs: https://www.aliexpress.com/item/1005006759023644.html?spm=a2g0o.order_list.order_list_main.52.5a6b1802iXJs1S
You will need at least 2 kg of plastic to print at 100% scale. The files are optimized for printing on printers with dimensions of 200x200x200 mm or larger. The sizes of the finger springs are as follows:
A: 66 mm.
B: 108mm
C: 110mm
D: 107mm
You can print using PLA plastic, with a minimum of 2 walls and at least 10% infill.
It is better to print the springs using PETG.