Discover the hidden settings of the HK-P1 e-bike controller and learn how to unlock its full potential. This guide covers step-by-step instructions to access and adjust key parameters for improved performance. Whether it’s adjusting speed limits, pedal assist levels, or sleep time, we’ve got you covered!
Thanks so much for watching! 👉🏻 If this video helped you, we’d really appreciate a thumbs up and comment !
The HK-P1 e-bike controller offers several adjustable settings that can enhance your riding experience. Accessing these settings typically involves interacting with the display panel on your e-bike. Here’s how you can access and adjust these settings:
1. Access the Settings Menu:
• Power On: Turn on your e-bike by pressing and holding the power button for a few seconds.
• Enter Settings Mode: Press and hold the ‘Up’ and ‘Down’ buttons simultaneously for about 3-5 seconds until the settings menu appears on the display.
2. Navigate Through Parameters:
• Use the ‘Up’ and ‘Down’ buttons to scroll through different parameters labeled as P01, P02, etc.
• Press the ‘M’ or ‘Mode’ button to select a parameter for adjustment.
3. Adjust Specific Parameters:
• P01 (Backlight Brightness): Set the display brightness; 1 is the darkest, 3 is the brightest.
• P02 (Unit of Distance): Choose between kilometers (0) and miles (1).
• P03 (Voltage Grades): Ensure this matches your battery voltage; options typically include 24V, 36V, 48V, and 52V.
• P04 (Sleep Time): Set the duration of inactivity before the display turns off; 0 means it stays on indefinitely.
• P05 (Assistance Levels): Select the number of pedal assist levels; options may include 3, 5, or 9 levels.
• P06 (Wheel Size): Input your wheel diameter in inches for accurate speed and distance readings.
• P07 (Speed Measuring Magnet): Set the number of magnets in your motor; this affects speed measurement accuracy.
• P08 (Speed Limit): Define the maximum speed; setting it to 100 typically removes the limit.
• P09 (Zero Start & Non-zero Start): Choose between immediate motor engagement (0) or requiring initial pedal movement (1).
• P10 (Driving Mode): Select between pedal assist only (0), throttle only (1), or both (2).
• P11 (PAS Sensitivity): Adjust how responsive the pedal assist system is; lower numbers mean higher sensitivity.
• P12 (PAS Start Strength): Set the initial power output when pedaling starts; ranges from 0 to 5.
• P13 (PAS Magnet Type): Specify the number of magnets in your pedal assist sensor; common values are 5, 8, or 12.
4. Save and Exit:
• After adjusting a parameter, press the ‘M’ or ‘Mode’ button to save the change.
• To exit the settings menu, either wait for a few seconds without pressing any buttons or press and hold the ‘M’ button.
Please note that the exact procedure and available parameters may vary depending on your specific e-bike model and display unit. For detailed instructions tailored to your device, consult the user manual or contact the manufacturer.
#EBikeController #HKP1Settings #HiddenFeatures #ElectricBike #PedalAssist #SpeedLimitUnlock #ElectricBikeMods #EBikeTips #ControllerSettings #BatteryManagement #RotaryEncoder #PASAdjustment #ThrottleControl #WheelSizeSetup #EBikePerformance