How I made a simple twisted Cuff Bracelet.
I found a broken copper basket in my old workshop and cut 3 thick wires from it. I twisted them with a drill, softened them and straightened the twisted copper wires with a rubber mallet. Then I took 3 older copper wires, stripped them and twisted them like the thick wires. I then filed the twisted wires straight and bent them on an old table leg to fit the size of my wrist. I then assembled the 3 twisted bracelets with metal clamps and soldered them all together - with the smallest one in the middle.
Then I used a copper wire scrap, pounded it flat and cut it into 4 pieces - 2 long and 2 short, which I used to make ends for the bracelet by bending them around the ends of the twisted Cuff bracelet. I soldered the 2 small pieces onto the ends to get a nice finish to the Cuff Bracelet.
After I had removed the metal clamps, all I needed to do was sand and polish the Cuff bracelet.
A simple Cuff Bracelet was finished - quite nice - I think.
#makingbracelets #mensjewelry #makingjewellery #cuffbracelet
Chapters:
0:00 Cutting up a copper basket
0:37 The copper wires are twisted and sanded
2:26 Shaping the twisted copper wire for bracelets
2:55 Clamping the twisted bracelets together and soldering them together
3:57 How I make copper ends for the Cuff and solder them to the Cuff
6:40 Presentation of the finished Simple Cuff Bracelet
Subscribe for more My Projects - videos:
https://www.youtube.com/channel/UCa6u8pIYPovyaV2LNZ9_RVg?sub_confirmation=1
If you want to be se how I made a Silver and copper bracelet Cuff, you might want to watch this video:
Making an EASY Braided Cuff Bracelet:
https://youtu.be/Fm0sHAshypc
This video is made for entertainment purposes.
Thank you for watching and your support.
Best, Bjorn