In this how-to presentation we look at the incredibly important process of crimping MC4's, from correctly mating the inserts to the connectors, tools used to cut and strip the cable through to the crimping process.
We are looking at this in relation to commercial solar systems where the voltages regularly get up to around 1000 volts and more if talking about solar farms.
Cable bending radius is discussed, correct insert seating and tightening of the MC4 nut are all shown in detail as well cable identification issues that may arise from tired solar installers!
This is perfect for the solar electrical apprentice who has never made an MC4 connection all the way to the experienced professional wanting to brush up on their technique.
Enjoy.
[Chapter]
00:00 Introduction
01:00 Inspecting the MC4s
02:00 Correct pairing on inserts and connectors
03:00 Long DC runs and correct cable selection
04:00 Stripping the cable
05:00 Making the crimp
06:00 placing the cable into the insert
07:00 Keep the strands attached
08:00 Wait until you hear the click
09:00 Careful with the inserts
10:00 High DC voltages running through the solar cable
11:00 Tightening the nut
12:00 Insert has to seat correctly
13:00 Taking the connection apart
14:00 The tools
15:00 Always check the cable
16:00 The cut test
If you’d like to see more of what Greenwood Solutions get up to in the real world of renewable energy, solar, battery storage and grid protection check out the following pages:
[Greenwood Academy]
https://www.greenwood.academy/
[Industry Services]
https://www.greenwoodsolutions.com.au/industry
[Commercial Services]
https://www.greenwoodsolutions.com.au/commercial
[Customer Stories]
https://www.greenwoodsolutions.com.au/commercial/customer-stories
[Blogs, Videos and the News]
https://www.greenwoodsolutions.com.au/news