First of all, the installation of Switch Lite replacement shell is difficult if you are a newbie of electronics repair. Especially for the LCD part, you have to heat it up and take it out gently.
So anyway this is a risky DIY project for you, but of course it will turn out a stunning result for your Nintendo Switch Lite.
GOOD LUCK!!
WARNING!!! Do NOT remove any electronic cables without disconnecting the battery first.
Shop Links:
Amazon US: https://amzn.to/3GOarTk
Amazon CA: https://amzn.to/3AKQ5qd
Amazon MX: https://amzn.to/3tZfUPv
Amazon DE: https://amzn.to/3u0VplM
Amazon UK: https://amzn.to/3V69B8V
Amazon FR: https://amzn.to/3AKCv6p
Amazon IT: https://amzn.to/3Vt4zmr
Amazon ES: https://amzn.to/3XtLnqK
Amazon AU: https://amzn.to/3Voq7kb
Amazon JP: https://amzn.to/3XuXJyG
eXtremeRate.com: https://extremerate.com/DLP313
Aliexpress: https://bit.ly/3OzZ1oc
eBay: https://ebay.to/3EBUzAD
Timestamps:
0:00 – Intro
0:12 – Pre-work Before the Process
2:27 – Open the Backplate
5:30 – Remove the Shield and Disconnect the Battery FIRST
7:05 – Remove the Heat Sink
8:10 – Lift the Game Card Reader and Headphone Jack
10:00 – Disconnect the Digitizer and Screen Cable
10:50 – Remove a Motherboard Screw and Disconnect the Fan
11:46 – Remove Three Motherboard Screws
12:18 – Disconnect the Right Joystick Cable
12:37 – Remove the Right Trigger and Bumper
13:29 – Remove Remaining Motherboard Screws
14:08 – Disconnect the Interconnect Cable
14:35 – Disconnect the Antennas
15:00 – Disconnect the Battery Cable (WRONG ORDER)
15:24 – Remove the Motherboard Assembly
16:05 – Remove the Stock Buttons along with the Membrane
16:53 – Remove the Right Joystick
17:33 – Remove Three Daughterboard Screws
18:20 – Disconnect the Interconnect Cable
18:36 – Remove Another Two Daughterboard Screws
19:37 – Disconnect the Joystick Cable
19:58 – Disconnect the Screen and Volume Button Cables
20:19 – Remove the Right Trigger and Bumper
21:01 – Remove the Daughterboard
21:18 – Remove the Buttons and Membrane
21:47 – Remove the Left Joystick
22:28 – Remove the Midframe
24:00 – Transfer the Thumbstick Dustproof Sheets
25:30 – Remove the Screen
30:25 – Reinstall the Screen to the New Shell
32:00 – Reinstall the Midframe to the New Shell
34:07 – Reinstall the Thumbsticks to the New Shell
36:07 – Reinstall the Replacement Buttons along with the Stock Membrane
38:12 – Reinstall the Daughterboard
41:09 – Reattach the Ribbon Cables to the Daughterboard
42:45 – Reinstall the Left Bumper
43:09 – Reinstall the Left Trigger Assembly
46:23 – Reattach the Interconnect Cable
47:00 – Reinstall the Motherboard and Organize the Ribbons
48:03 – Reattach the Screen and Digitizer Cables
49:04 – Reconnect the Fan
49:44 – Reinstall the Game Card Reader and Headphone Jack
52:01 – Secure the Speaker and Motherboard
53:57 – Reconnect the Right Thumbstick
54:35 – Reinstall the Right Bumper
54:60 – Reinstall the Right Trigger Assembly
56:40 – Reattach the Battery Cable and Interconnect Cable
57:17 – Reattach the Antennas
58:08 – Reinstall the Heat Sink
59:15 – Secure the Charging Port
59:50 – Reinstall the Shield
1:01:47 – Transfer the Components and Assemble the New Backplate
1:06:23 – Install the Backplate
1:10:48 – Power On and Test the Functionality
1:11:44 – Apply the Screen Protector
1:15:55 – Transformation is Complete