In today's video I show you how I made a portable folding work bench using my two Stanley V Groove Saw Horses.
You can buy me a coffee here https://www.buymeacoffee.com/charliediyte or become a monthly member to unlock Discord forum membership, exclusive content and automatic entry into my FREE Monthly Giveaway. Thank you SO SO much!!
You can now access my 🛠Charlie DIYte Amazon Tool Store here https://www.amazon.co.uk/shop/charliediyte - where you'll find all my tried, tested and much loved DIY tools arranged into handy categories.
TODAY'S TOOL KIT *
- Stanley V-Groove Folding Saw Horses Twin Pack £49.99 /$68.65 https://goo.gl/f4rxBU
- See also Stanley Folding Junior Saw Horses £30.86/ $42.38 https://goo.gl/QZmm6n
- CLS 4"x 2"timber, 2x 2.4m lengths £4.44/ $6.10 for 3 metres https://goo.gl/bXhMdu
- SiteMate Decking Srews 4.5x75mm (8x3")
- Exterior ply, 18mm thick £26.10/ $35.84 https://goo.gl/yHvPjP
- Combination square £22.99/ $31.14 https://goo.gl/6ygiwR
- Sliding Joiners Bevel £9.99/ $13.72 https://goo.gl/HXa3WQ
- Irwin Jack Floorboard Saw £9.99/ $13.72 http://bit.ly/321En6F
- Irwin Jack Universal Saw £5.99/ £8.23 http://bit.ly/2Pt4YXx
- * Bosch Jigsaw UK https://geni.us/kPfUX (Amazon)
* The Amazon link above is an affiliate link. It doesn't cost you anything to click on it but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
You can access my whole video series here:
Video 1: http://bit.ly/2s0bMyH
Video 2: Castor wheel: http://bit.ly/2GMhizl
Video 3: Protective edging http://bit.ly/2RrlSqM
Video 4: Now with hinges https://bit.ly/2LqGjTp
Video 5: UJK Parf Guide System http://bit.ly/2GKMZJa
I've had my Stanley V-Groove saw horses for a year or so now (gift from my father-in-law). I use them a lot, for everything from painting windows, through to improvised work bench when I'm on site with my day job.
The problem with them is that they can be a bit unstable when you're routing or planing a piece of timber. So I decided to create a super structure that would make them more stable.
I came up with a plan for how to make my folding work bench and then realised I had been beaten to it. Here's a link to the original idea https://goo.gl/YPXQPb which I thought I should give credit for in my video as his design and mine are very similar :)
So I went off to my local timber merchants, and picked up two 2.4m lengths of CLS timber and a sheet of 18mm thick exterior plywood - which I had cut at the timber merchants 900mm in from the edge straight down the middle.
I cut two V grooves in the timber, slotted them down onto the saw horses and then screwed the 18mm plywood down onto the CLS timber struts to create an incredibly sturdy, strong work bench.
NOTE:my work bench top at 2.400mm x 900mm is quite heavy, so if you're making one of these, give some careful thought to the size you're going to make yours - both in terms of:
1) what size you need it to accommodate the things you're cutting;
2) whether you're going to be able to move it around easily; and
3) whether you've got anywhere that you can easily store it.
SUBSCRIBE - you can subscribe to my Channel here:
http://www.youtube.com/c/CharlieDIYte
LET'S CONNECT!
Charlie DIYte
-- Email: [email protected]
-- https://www.facebook.com/charliediyte
-- https://charliediyte.co.uk/
-- https://www.instagram.com/charliediyte/
-- https://twitter.com/CharlieDIYte