Buy Now!
New Door Lock Actuator from 1AAuto.com https://trq.video/ic-1ADLA00219
This video shows you how to replace the lock actuator so that you don’t need to purchase an entire latch assembly on your 2002-2006 Honda CR-V. Power door lock systems typically use some sort of actuated motor to drive the lock mechanism. If the actuator breaks, then the door lock will no longer operate electronically.
This repair was done on a 2002 Honda CR-V EX 2.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V
Tools you will need:
• Flat Blade Screwdriver https://trq.video/oMq-1AXAA00013
• Phillips Head Screwdriver https://trq.video/oMq-1AXAA00013
• Pocket Screwdriver
• 10mm Socket https://trq.video/oGC-1AXAA00017
• Trim Tool Set https://trq.video/ooL-1AXXX00006
• Needle nose pliers https://trq.video/ogK-1AXAA00051
• Needle nose pliers https://trq.video/ogK-1AXAA00052
• Socket Driver
• Gloves https://trq.video/ofI-1AXSS00048
• Pick https://trq.video/oiL-1AXAA00037
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Honda CR-V 2002-2006 2nd Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9nIaVEjf3ERGlUsk2N5b0E
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.