Buy Now!
New Transfer Case Shift Motor from 1AAuto.com https://trq.video/ia-1AFWM00065
This video shows you how to install a new transfer case shift motor on your 2011-2021 Jeep Grand Cherokee 3.6L V6. If you are experiencing problems with your vehicle’s 4 wheel drive system being able to select modes, there could be a problem with the transfer case shift motor.
This repair was done on a 2015 Jeep Grand Cherokee Summit 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• 8mm Deep Socket
• Torque Wrench https://trq.video/obw8-1AXAA00044
• Cloth Rags https://trq.video/oXS-1AXSS00035
• Gloves https://trq.video/obIo-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaPV-1AXAA00068
• Jack Stands https://trq.video/oaBu-1AXAA00065
• Pick https://trq.video/oacu-1AXAA00037
• Sanding Block
• Wheel Chocks
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.