MightyMouse Catch Can Install on Corvette Z06, Camaro ZL1 similar. I wanted to do the install without bending or cutting anything. The Chevy LT4 6.2L engine used in the Corvette Z06, and Camaro ZL1 requires a special procedure to install the catch can. You must lift the blower to install a diverter valve. That is the hardest part, and once that is done, the rest is pretty easy.
On this can I had to sand down the fittings a bit to make a good seal. The fittings are a specific length to the MightMouse Gen 5+ catch can and they have to be pretty precise to seal, so I did not mind doing this. I also moved one of the ground straps so I would not have to bend it.
You can get the fittings for the throttle body so you don't have to cut the factory line. Its $15 plus shipping for the two pieces
If you want to attach quick fittings to the can you can get most everything on Amazon:
Female AN-8 to Female AN-8 full flow elbow (2) https://amzn.to/3i15Alf
AN-8 to 3/8” snap fitting (2) https://amzn.to/3c1XrcC
Snap fitting (2) I can supply as I have not found good ones on Amazon
The throttle body T with male fitting is $15 plus shipping
If you have any questions please let me know,
Thanks!!
#garageking #mightymouse