In episode 2 of the Paint Prep process video series, Kevin Ansell, 3M Application Engineer talks about masking off the repair area after featheredging.
Important notes (00:30)
Wear proper PPE: safety glasses, protective gloves, respirator and whatever else you need for the job. This video is intended for a professional setting such as a body shop or paint shop. Make sure to check OEM recommendations to confirm you’re using the correct adhesive for the job.
Always Clean before Masking (00:47)
This helps ensure the best possible adhesion.
Masking for a Soft Paint Edge (01:17)
Back Masking (01:35)
Masking the Repair Area (01:58)
Plastic Sheeting (02:46)
Important note:
There are of course many factors and variables that can affect an individual repair, so the technician and repair facility need to evaluate each specific application and repair process, including relevant vehicle, part and OEM guidelines, and determine what is appropriate for that repair.
Products used in this video:
Scotch® Performance Green Masking Tape 233+
https://www.3m.com/3M/en_US/p/d/b40067039/
3M™ Soft Edge Foam Masking Tape PLUS
https://www.3m.com/3M/en_US/p/d/b40067059/
For more advanced tutorials, check out 3M Collision Repair Academy
https://www.3m.com/3M/en_US/collision-repair-academy-us/
You’ll find courses that will expand your knowledge, deliver practical procedures that you can use right away, and, in many cases, earn you I-CAR credits.
Safety and warranty information
https://www.3m.com/3M/en_US/collision-repair-us/resources/info/
Website: https://www.3MCollision.com
Instagram: https://www.Instagram.com/3MCollision
Facebook: https://www.facebook.com/3MCollision
Twitter: https://twitter.com/3MCollision