Replacing The Traction Drive Belt and Attachment Belt on old Ariens Snow Blower 926101 from 2005 - In this video I take apart my Ariens Snow Blower (2005 Sno-Thro) model 926101 and replace the traction drive belt. This video also demonstrates how to get to and replace the attachment belt. It’s not an easy job, but I did it with one hand on the camera. I made this video in order to refer to it in the future since I usually have to repair something on the snow blower every few years. The V-belts and other parts can be purchased directly from Ariens and their website is easy to use. Prices on the Ariens website are fair in my opinion and cheaper than purchasing them from a local shop.
Points In The Video:
0:12 Disclaimer
0:32 Tools Required For The Repair
1:02 V-Belt Part Numbers
1:05 How To Get Parts, Parts List, Manuals
1:35 CAUTION - Remove Fuel
1:42 Removing The Belt Cover
2:30 Removing The Back Panel
3:20 Removing The Discharge Chute Rod Connections
4:20 Disconnecting The Deflector Cable
5:09 Removing The Discharge Shoot Lock Cable and the Discharge Chute Rod Hair Pin
6:23 Removing The Belt Finger
7:11 Detaching The Attachment Belt
7:45 Separating The Front and Back Sections
9:42 How The Sections Attach
9:53 If you're just replacing the Attachment/ Auger Belt
10:01 Removing The Stop Bolt and Springs
11:25 Reassembly
11:40 Replacing/ Putting on The Traction Drive Belt
13:54 Reattaching The Springs and Stop Bolt
11:49 Replacing a clip I lost
15:24 How The Traction Drive Works
15:45 Bringing The Front and Back Sections Back Together - Attachment Belt Placement
17:54 Putting The Attachment Drive Belt Back Into Place
19:20 Reattaching The Belt Fingers
20:18 Reattaching The Discharge Chute Lock Cable
20:21 Reattaching The Discharge Chute Rod (Front)
22:36 Reattaching The Deflector Cable
23:33 Reattaching The Discharge Chute Rod To The Discharge Chute Control Lever (Back)
24:10 Adjusting The Discharge Chute Locking Cable
25:26 Test Run - Checking Traction Drive and Auger Attachment
OEM Replacement Part Numbers for Model 926XXX
Traction Drive V-Belt
07200101 (models 001, 002, 004, 005, 101, 102,
300, 301, 304, 502, 504)
07200102 (models 003, 006, 103, 302, 303, 500, 501)
Attachment Drive V-Belt
07200623 (models 001, 002, 004, 005, 101, 102, 300,
301, 304, 502, 504)
07200021 (models 003, 006, 103, 302, 303, 500, 501)
change belt on ariens 926101, transmission drive belt, auger belt, snow blower, snowblower, belt replacement, belt repair, broken belt, traction drive belt, wheels not turning, auger not turning, auger not spinning, take apart, disassemble, reassemble, transmission drive belt, change belt on ariens 926101
Disclaimer:The author assumes no liability for any incidental, consequential, or other liability from the use of this information. All risks and damages, incidental, or otherwise, arising from the use or misuse of the information contained herein are entirely the responsibility of the user. Although careful precaution has been taken in the preparation of this material, author assumes no responsibility for omissions or errors.