How to install Pergola Top Star , step by step.
00:00 Mount the wall-brackets.
00:10 Mount the guides onto the brackets.
00:23 Place the general regulators.
00:35 Assemble the parapet.
01:00 Mount the guides onto the parapet.
01:19 Before placing the tube, end all the runners in the upper side of guides.
01:23 Tube fitting.
01:27 Place the motor into the tube. Motor’s cables must be downside.
01:42 Fit the support beam onto the cover material.
01:55 Stretch the cover material properly with the screws and the plugs that you will find into the package.
02:23 End all the runners in the lower side of guides.
02:29 Place all the support beams with the cover material onto the guides and fit them into the runners.
02:34 Place all the support beams in the highest side of guides.
02:39 Line up all the support beams and screw them up onto the runners.
02:47 Place the last support beam onto the general regulator.
02:53 Shut the pergola down.
03:01 Stretch the cover material from the general regulator.
03:09 Screw all the support beams onto the runners.
03:20 Place the lifting system right on the similar receptors. Make sure that the hinge’s edge is facing to the cover material.
03:50 Mount the lifting system onto the lifting support beams.
04:06 Place the plugs.
04:15 Adjust the motor limits.
04:18 Pergola Top Star has been successfully installed.
http://www.metaform.gr/products/top-star?&lang=en