Learn to sew your own Round Wing Zipper Pouch in this detailed sewing tutorial.
If you have any questions along the way, you can direct message me on instagram (@torieandren) or comment below and I will try my best to answer as soon as possible. For pattern updates or corrections visit my instagram and check my story highlights.
For written instructions visit: https://torieandren.etsy.com/listing/1633254727
Instagram: @torieandren
Templates can be found here: https://bit.ly/3RDFCps
The seam allowance for this project is ¼”. Seam allowance is indicated at each step.
Finished Size: Approximately ≈ 5¼” × 5¾”
Materials:
Faux suede/leather vinyl is recommended for Print C. Other materials such as quilting cotton, cotton linen (55% linen and 45% cotton), and 21 wale (21W) cotton corduroy can be used for Print C. A lightweight fusible fleece is recommended to reduce bulk which will help keep the bottom round when turned inside out.
You may require other supplies such as snap pliers/fasteners or a press, pinking shears, scissors, pins, a rotary cutter, thread to match your fabrics, and a ruler or measuring tape.
Materials (Yardage)
Print A (Quilting Cotton): Fat Eighth
Print B (Quilting Cotton): Fat Eighth
Print C (Faux Suede/Leather): Fat Eighth
Print D (Quilting Cotton): Fat Eighth
Lightweight Fusible Fleece (Pellon 986F or similar): ¼ yard
Continuous Nylon Zipper #3 or No. 3 or Size 3: ¼ yard with 1 Zipper Pull Cut to 5¾”
12.5mm or Size 20 Fashion Spring Snaps
Materials (Scraps)
Print A (Quilting Cotton): N/A
Print B (Quilting Cotton): (2) 4” × 6½” and (1) ≈ 1” × 2¼”
Print C (Faux Suede/Leather): (2) 2¼” × 6½”
Print D (Quilting Cotton): (2) 5¾” × 6½”
Lightweight Fusible Fleece (Pellon 986F or similar): N/A
Continuous Nylon Zipper #3 or No. 3 or Size 3: ¼ yard with 1 Zipper Pull Cut to 5¾”
12.5mm or Size 20 Fashion Spring Snaps
Cutting:
Print A (Quilting Cotton)
(2) Bottom Template
(1) Pocket Template
Print B (Quilting Cotton)
(1) Flap Template (Template facing up)
(1) Flap Template (Template facing down)
(1) 1” or width of zipper × 2¼” Zipper Tabs
Print C (Faux Suede)
(2) 2¼” × 6½” Exterior Accent
Print D (Quilting Cotton)
(2) Lining Template
Fusible Fleece
(2) Bottom Template
(1) Flap Template (Cut with the template and glue side of the fusible facing up)
(4) 2” × 6½”
(1) 2” × 2”
Materials used in this video:
Fabric:
Print A is Little Fawn and Friends by Nina Stajner for Dear Stella
https://www.hawthornesupplyco.com/little-fawn-and-friends-fabric-collection-by-nina-stajner/friends-in-cream/2130C49A6685/
Print B is Countryside Comforts by Jane Carkill (LambLittle) for Figo Fabrics
Print C is faux suede bought from sewersclub.com in store.
Print D is Little Fawn and Friends by Nina Stajner for Dear Stella
https://www.hawthornesupplyco.com/little-fawn-and-friends-fabric-collection-by-nina-stajner/autumn-ferns-and-leaves-in-cream/C17FB8264000/
Interfacing:
Pellon 986F OR 987F
https://sewersclub.ca/products/pellon-986f-lightweight-fusible-fleece-white?_pos=1&_sid=4068f9fe0&_ss=r
https://sewersclub.ca/products/pellon-987f-fusible-fleece-white?_pos=1&_sid=f9029f651&_ss=r
Hardware:
Zipper & Pull: https://sallietomato.com/en-ca/collections/zippers/products/white-3-nylon-coil-zippers-by-the-yard?variant=42914216050903
Snaps: I can't remember where I got my snaps, but KAM snaps has some https://kamsnaps.com/collections/fashion-spring-metal-snaps/products/fashion-spring-metal-snaps?variant=40241253908577
I am affiliated with and have personal ties to Sewers Club and Owl Be Sewing, but do not make a commission off the products I recommend or share. My opinions are my own and I share products because I love them. I do get items at a discount unrelated to Torie and Ren videos and patterns.
Thanks for stopping by, I hope you love this project just as much as I do.
with love,
torie and ren