#phytolamp #watercoolingsystem #LEDcooling
Assembling and launching the system with a new radiator. Overclocking LED modules to almost maximum. Checking system performance, profile and module temperatures.
Conclusions on the viability of the water cooling concept based on pneumatic rallies and machine profile. Summarizing.
Our telegram channel - https://t.me/quantumboard_specled
SolBeam module - https://specled.com.ua/ru/led-moduli-dlya-rastenij/753-linejnyj-led-modul-sol-beam-41x450mm.html
Links to components from AliExpress:
https://alii.pub/6ty8qo - radiator for 120mm fan (choose without pressed fittings);
https://alii.pub/6tz4un - sets of ready-made coolers (assuming that the outlet fittings will have to be replaced);
https://alii.pub/6tz5pk - complete cooler, fits 8mm tube.
https://alii.pub/6tz4uu - good pump;
https://alii.pub/6tz4v8 - pump with reservoir;
https://alii.pub/6tz4vm - excellent productive pump;
https://alii.pub/6tz4w0 - flow sensor with digital thermometer;
https://alii.pub/6tz4zw - separate tank;
https://alii.pub/6tz4w7 - 1/4 inch fittings, suitable for tank and pump;
https://alii.pub/6tz4we - tubes for pneumatics (used 6mm and 8mm outer diameter);
https://alii.pub/6tz4y5 - end fitting with M5 thread (choose type PC, size 6-M5);
https://alii.pub/6tz4ws - fitting with M6 thread into the end of the profile (I used PC6-M5, but I recommend straight to the 8mm PC8-M6 tube, screw it in with thread sealant from a plumbing store);
https://alii.pub/6tz4zb - pass-through fitting (choose 8mm for the tube);
https://alii.pub/6tz50o - corner fittings, tees, splitters, taps of different diameters (choose according to your requirements);
https://alii.pub/6tz519 - adapter from 6mm to 8mm tube.
https://alii.pub/6tz53s - taps;
https://alii.pub/6tz54d - the simplest fittings M5, M6 (use with thread sealant);
https://alii.pub/6tz54y - fitting for pump and reservoir (choose 6mm);
https://alii.pub/6tz55q - clamps of all sizes;
https://alii.pub/6tzaqz - M3 embedded nut in profile 2020 (used M3);
https://alii.pub/6tzary - M3 embedded nut in profile 2020 (recommended).
Timings:
00:00 - splash screen
00:10 - comparison of new and old radiator
02:53 - launch of the system with a new radiator
07:24 - start of temperature measurement
11:26 - temperature measurement with a performance fan installed
14:23 - about the essence of a water-cooled system
16:01 - first conclusions
17:50 - announcement of possible designs
22:07 - see you again
►The best service with affiliate programs (AliExpress) - https://epn.bz/ru?ref_type=epnbz&inviter=000tg4a
Cashback (aka) with withdrawal via TonCoin (+10%) - http://shp.pub/64kymr
.
►►Partner media network AIR - www.air.io/r/specled
Instagram - https://www.instagram.com/specled.com.ua/
LED lighting and accessories store - https://specled.com.ua