SONYX NEO PIXEL LED LAMP (Full 3D Printed Lamp) CR10sPro Nanoleaf Replica PRO

MR.SONYX NEO PIXEL LED LAMP 🤩 No soldering or wiring is necessary. everything is connected to a bluetooth controller and controlled by mobile app. (Because of the corona virus, my plan for this project was completely destroyed. Due to delivery delays, I was too late with printing. now unfortunately i have already started with my new job and further training at the same time.So I don't have much time to make videos at the moment) I WILL EXPLAIN EVERYTHING IN DETAIL IN ----- [PART02] ----- OF THE TUTORIAL 😁 Thank you for your feedback and support! The parts were printed on my creality CR10sPro in about 150h and it took about 2.5kg of Sakata3D filament. I used a 0.6mm nozzle to speed up the print time. PART LIST ❤ # Creality3D Cr10sPro ❤ ❤ # Sakata 3D Filaments PLA 850 Natural ❤ https://sakata3d.com/gb/pla-850/22-pla-850-natural.html ❤ # Sakata 3D Filaments PLA 850 White ❤ https://sakata3d.com/gb/pla-850/24-pla-850-white.html # WS2812B LED Stripes 5m - 60/1m https://a.aliexpress.com/_dU2N4Bz # LED Pixel Bluetooth Controller DC5-12V 3Pin https://a.aliexpress.com/_dTbtMmx # LED Signal 1 to 2 splitter 3pin # White Matte Spray Paint (for GLAS) https://www.amazon.de/dp/B07PN64S14/ref=cm_sw_r_wa_awdo_t1_kgWUEbYDQQ2Z3 # 5V DC POWER SUPPLY https://de.aliexpress.com/item/32794814341.html?spm=a2g0o.productlist.0.0.18461f44BKB08v&algo_pvid=ad4a5c84-8d3a-446f-90bd-c26f532f96f8&algo_expid=ad4a5c84-8d3a-446f-90bd-c26f532f96f8-3&btsid=0ab6fab215893154253121837eb06e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ https://www.thingiverse.com/thing:4353656