Tesla Coil UD3 Connection, Setup and Software Test (Part 2 of 3)

This is the second video in a series of three, on how to get started with the DRSSTC UD3 Tesla coil driver. In this video I go through which hardware parts to change, how to configure the UD3, update firmware and use TeslaTerm to control and troubleshoot on a DRSSTC.

If you missed the previously part 1, check it out here: https://kaizerpowerelectronics.dk/teslacoils/nextgen-drsstc-ud3-unboxing-soldering-startup-and-software-part-1-of-3/

HVF Thread on the development: https://highvoltageforum.net/index.php?topic=188.0

The UD3 is a Tesla coil driver board for controlling a DRSSTC or QCW. The interrupter is embedded in the UD3 (Classic Mode / MIDI / SID(C64) / QCW Ramp). The UD3 was originally developed by Steve Ward.
- Embedded interrupter with MIDI and SID audio modulation
- Primary resonator fres measurement (frequency sweep)
- Primary peak current measurement over feedback CT
- Pulse skipping
- Alarm/Event system for fault tracing
- System fault interlocks for undervoltage/temperature/watchdog
- Bus current measurement (current or voltage mode CT)
- Controls up to 4 relays to handle inrush current and other things
- Can control an external light display for showing selected parameters
- It runs FreeRTOS, making it easy to add new functionality
- Commandline over serial interface
- Multi user commandline over MIN-Protocol
- Dual voltage measurement (differential)
- Support for Teslaterm and UD3-node
- Telemetry over serial
- Bootloader with serial/usb support (firmware update with Teslaterm)

UD3 github: https://github.com/Netzpfuscher/UD3/wiki
TeslaTerm github: https://github.com/malte0811/Teslaterm
FiberNet github: https://github.com/TMaxElectronics/UD3_Fibernet
UD3.1b github: https://github.com/TMaxElectronics/UD3.1

Support the channel, join as a member here: https://www.youtube.com/channel/UCSukTlgTEWiL-sl0UeYeJvQ/join

↝↝ Additional information and links ↜↜
★ Partners: @arcattackmusic and @franzolielectronics
★ Music by Mikas: https://www.facebook.com/mikasdk/ (used with commercial permission)
★ T-Shirts, mugs and other merchandise: https://teespring.com/stores/kaizer-power-electronics
★ Electronics website: https://kaizerpowerelectronics.dk
★ Facebook: https://www.facebook.com/kpedk/
★ High Voltage Forum: https://highvoltageforum.net
★ My Slow motion videos channel: https://www.youtube.com/channel/UCB2qu77PCr5i9zcs0sOhp4w
★ Find me at Odysee: https://odysee.com/@KaizerPowerElectronics:9 and https://odysee.com/@SlowMotionVideos:5
★ Find me at LBRY: https://lbry.tv/@KaizerPowerElectronics:9

$ For commercial/non-commercial licensing of material, contact through here: http://kaizerpowerelectronics.dk/about/contact/

♥ Donations. Please consider one of the following:

♥ Donate via Paypal: fleex@disorder.dk

♥ Donate crypto currency directly on these addresses (Check if there is minimums before transfer):
• BTC (0.0001 minimum): 3FtSz4svHxLYw4BNHWetSm65yajUZNb8CY
• ETH (0.05 minimum): 0x911d11766d3ab8efc829eb5f218f3b83dba12efa
• LTC (0.01 minimum): LLbTw63Mks4CmeWmkt2jChJfvrWHheH8T7
• DOGE (no minimum): DMRRa8uRH19tYWZ9GVHijpZYgRTecNVLFo
• SHIB (400 minimum): 0x8c1ed98c6c842467d782d2f865ed6d7adb8dfb4b

#electronicscreators #tesla #teslacoil