In the comments to the previous video Instructions for Toyota Prius 30
https://youtu.be/AbaWfAixkyE
asked to tell in detail about the settings menu "DISP" (display)
By and large, the display settings on the Toyota Prius 30 are very meager, it is much better to customize the Prius for yourself using the diagnostic equipment connected to your Toyota car via the OBD2 diagnostic connector, as I did in the previous video "Disabling the Reverse Beeper and Not Fastened Seat Belt" https://youtu.be/OS6Ss6A4bmE
But today I'll tell you exactly about the DISPLAY settings menu or abbreviated DISP as it is written on the button that the Toyota Prius 30 has on the steering wheel on the right side.
And so in order:
1. You can enter the display settings menu only if your car is stationary, that is, the speed on the speedometer is "0".
2. Press the DISP button located on the right handlebar the required number of times until the display shows the inscription "Settings"
3. Press the DISP button and hold it for more than two seconds until the “Settings” message on the display changes to the settings menu.
Where will it be written:
"EKO"
"Switch. Steering wheel. Control. "
"Watch"
"Language"
"Turn off screen"
"Output"
4. In order to change the value of any of these items, you must select the item you are interested in, by pressing the DISP button (pressing the other buttons does not affect what you select), when you have selected the item of interest, press and hold the DISP button for more than two seconds to open submenu for selecting a function value (enable or disable)
5. To select a value to turn on or off, briefly press the DISP button, having selected the value, press the DISP button for more than two seconds, thus saving the selected value.
6. Description of modes:
“EKO” - whether or not the “EKO” logo will turn on on your display when you drive economically.
"Switch. Steering wheel. Control. " - will or will not light up near the speedometer, the designation of the buttons on the steering wheel which you touch.
"Clock" - select the time format in which the clock "12" or "24" will be displayed
"Language" - Select the language in which the menu is displayed on the display of your Prius. The choice of languages is limited by the firmware installed in the display of your Toyota Prius. Adding languages is possible by flashing the instrument panel (speedometer), which means it is necessary to disassemble the parprise (dashboard), remove the instrument panel, disassemble it, and reprogram.
"Turn off screen" - allows you to turn off or turn on the display (NOT SPEEDOMETER), if you turn it off when you press the DISP button, you will either have the display turned off, or the inscription "Settings" to go into the settings and turn on the display. Display functions such as “Indication of the hybrid system”, “Seat belt for rear passengers”, “5min. Fuel consumption ”,“ Previous data ”and“ Energy flow ”- Will not be displayed.
"Exit" - Selecting the exit item and holding the DISP button for more than two seconds exit the settings menu. You can still wait 30 seconds and the settings menu will close on its own.
Something like this!