Monitor your batteries better than before with FSIP's Smart Discharger & BMS Kit. How so? The discharge is completed hands-free! Why manually check voltages with a volt meter when the Smart Discharger can do the work for you? The BMS sensors allow per-cell monitoring by sending readings to the Integrated Monitor software every three minutes during the discharge. The Smart Discharger provides a programmable cycle termination as well as alarm voltages.
Shop Now:
https://shop.fsip.biz/en/product/battery-management-dischargers/new-smart-discharger-and-bms-kit--93-DISCHKIT01
#SmartDischarger #BatteryManagement #FSIP #ForkliftIndustry #MaterialHandling
Video Transcript:
What's up? I'm Dustin. Today, we're gonna take a look at our Smart Discharger. You may be saying, "How can a discharger be smart?" Well, we're gonna show you! So, the discharger works in conjunction with the BMS sensors. We're gonna go ahead and put a sensor on every single cell. So, we have our BMS system hooked up. They're gonna send a reading to the laptop every three minutes. So, we're gonna get our first reading, wait for three minutes... BOOM! Another reading. Wait for three minutes... BOOM! Another reading. Discharge is set to not go below 40.8 volts and also have an alarm set to not go below 1.5 per cell. Now, I'm going to click "Start..." And we're gonna come back when it's all finished. So, it's the end of the day. Discharge should be done. Printed out our load test results, so now we're gonna take a look at some of these readings. I can see here that Cell 10 started to fail at about two hours into the discharge, so now I'm either gonna get that cell jumped out or get it replaced. Thanks to our Smart Discharger Kit, we were able to complete this whole load test hands-free. Call Flight Systems Industrial Products if you'd like to learn more. I'm Dustin Love, and thanks for watching!