Y&H PWM FT Series Solar Charge Controller Operation Demonstration

The controller is an intelligent, multi-purpose solar charge and discharge controller. It features a fixed LCD display with a very user-friendly interface and various control parameters can be set flexibly to meet your application requirements.

Multi-angle display of the controller, display of the main board inside the controller

Operation demo:
1.The positive and negative poles of the battery and solar panel must be accurately connected to the positive and negative poles of the controller. At the same time, it should be noted that the positive and negative poles of the battery cannot be connected together to avoid damage to the battery due to the formation of a loop.
2.First short press MENU to switch to the float charging interface. Press and hold MENU to set the float voltage.
3.Press and hold MENU to enter the under voltage recovery voltage setting.
4.Press and hold MENU to enter the under voltage setting
5.Setting the load mode
6.Setting the battery type

10A/20A：
https://www.yonghuisolar.com/products/y-h-10a-20a-pwm-solar-charge-controller-12v-24v-auto-lcd-display-battery-intelligent-regulator-for-lead-acid-lithium?variant=42523727397020

30A/40A/60A:
https://www.yonghuisolar.com/products/y-h-30a-40a-60a-pwm-solar-charge-controller-max-pv-50v-12v-24v-auto-lcd-display-battery-intelligent-regulator-for-solar-panel?variant=42523728609436

60A/80A/100A：
https://www.yonghuisolar.com/products/y-h-60a-80a-100a-pwm-solar-charge-controller-max-pv-100v-12v-24v-48v-auto-lcd-display-battery-intelligent-regulator-for-solar-panel?variant=42523743191196