Building The 5-Axis CNC Machine in a Small Room: A DIY Journey. (Part15)

#DIY#CNC#5axis#Awesome_CNC_Freek
PNC Configuration Wizard: Run CNC with Ease!
Transform your CNC machine setup experience with the PNC Configuration Wizard on Linux CNC 2.9! In this video, learn how to install Linux CNC on a Raspberry Pi 4 and configure it with the Mesa 7C81 motion control board via an SPI connection. Whether you're a beginner or a seasoned CNC enthusiast, this guide simplifies the complex.

🔧 What's Covered:

Setting up Linux CNC on Raspberry Pi 4.
Installing and configuring Mesa 7C81 for real-time CNC control.
Step-by-step walkthrough for enabling SPI connections and installing firmware.
Insights into 5-axis CNC machine configurations using PNCconf.
This video is part of our DIY 5-axis CNC machine series—a journey from planning to execution. Don't miss out on revolutionizing your workspace with open-source tools and powerful configurations.

👀 Key Highlights:

Simplified steps to configure your CNC for real-time performance.
Why Mesa 7C81 is the perfect companion for your Raspberry Pi.
Hands-on troubleshooting tips and customization options with PNCconf.
🌟 If you're passionate about CNC, Linux CNC, or DIY projects, subscribe to explore more! And remember, the beauty lies not just in the machine but in the maker's heart.

Set Up LinuxCNC on Raspberry Pi4.
https://youtu.be/cChl9ge2kwA

Wondering what to do after installing Linux CNC?
https://youtu.be/5IFXws-YkGY

Must-watch for LinuxCNC users! Discover the power of VISMACH
https://youtu.be/Ch6HwyWmSRg


MESA 7C81
https://store.mesanet.com/index.php?route=product/product&product_id=338

LinuxCNC
https://linuxcnc.org/docs/
Commands used----------------------------------------------------------
Enable SPI:
menu-config

After rebooting, check if the SPI device is recognized：
ls /dev/spidev*
sudo reboot

When there is a problem with file access rights:
sudo chmod -R 777 [Target directory or file]

Decompression App :
sudo apt update
sudo apt install file-roller

Installation of MESAFLASH:.
sudo apt-get update
sudo apt-get install mesaflash

You can view detailed information about Mesa boards. :
sudo mesaflash --device 7C81 --spi --addr /dev/spidev0.0 --readhmid

For PNCconf:
sudo mkdir -p /lib/firmware/hm2/
sudo cp /home/cnc/Downloads/7c81/configs/hostmot2/* /lib/firmware/hm2/

-----------------------------------------------------------
Web Site https://www.acncf.site/en/top

Become a member of this channel to access the benefits:
https://www.youtube.com/channel/UCOKskywuQDlnV8yIkv67Gfw/join

*These are affiliate links. When you click one of these links and make a purchase, it helps to support this channel projects.