Connecting Operations In Part Design | Modelling a Mug | Basic Beginners FreeCAD v1 / 0.22 Lesson 12

This FreeCAD tutorial we'll expand how to connect operations across multiple planes and profiles. This guide is perfect for beginners, offering a gentle introduction to FreeCAD's sketch attachment mode. You'll learn a simple trick to create a thickened surface with single open outline in the Sketcher, making your modeling faster.

This is for FreeCAD version 1 also known as 0.22, 1.0 CR.

Public playlist : https://www.youtube.com/playlist?list=PLWuyJLVUNtc3UYXXfSglVpfWdX31F-e5S
NOTE: If your a patreon then you will have access to the early access private playlist.

What You Will Learn:
In this lesson, we'll cover the following FreeCAD operations at a beginner level:

Part Design:

* Revolve: Learn how to create revolved shapes for complex designs. We will use this for the cup.
* Sweep / Additive Pipe: Understand how to use the sweep feature to create intricate pipes for a supplied profiles. We will use this for the handle.
* Sketch Attachment Mode: Discover how to attach sketches to existing edges, vertices, or points for precise placement.
* Fillet: See why a fillet might fail and fix the problem.

Sketcher:

* Offset: Learn to quickly create a closed wire within your sketch for an open one.
* Import Geometry: Find out how to import existing geometry into a new sketch for accurate modeling.
* Fillet: Smooth out sharp edges in your sketches with the fillet tool.
* Construction Geometry: Use construction lines to guide your sketching without affecting the final model.


#FreeCAD , #CAD , #3DPrinting
Journey with me and

Patreon
https://www.patreon.com/mangojellysolutions

Donate:
https://ko-fi.com/mang0

https://www.paypal.com/paypalme/darrenbestone

Subscribe:
https://www.youtube.com/channel/UCUWhaOxsRk_5oPPq00_Y7Dw?sub_confirmation=1

Browse my Redbubble Shop:
http://MangojellyLabs.redbubble.com

Blog:
https://mangojellysolutions.blogspot.com/