This was from three kiln loads. A lot of experiments in this batch and almost everything turned out perfect which doesn’t happen very often.
This firing the top temp was 2200 with a 10 min hold! Dropped the temp to 2000 with a 30 min hold!
Cone 5.5
Chun sea foam
https://glazy.org/recipes/9793
Lynette’s Opal
https://glazy.org/recipes/131996
Studio white glaze
Minspar 46.1%
Gerstley 13.5%
Silica 19.7%
Whiting 8.2%
Dolomite 5.9%
Zinc Oxide 3.9%
Zircopax 10%
Bentonite 2%
I use plainsman clay M370
Different ways you can support our channel
☕️ buymeacoffee.com/UndsethPottery
🛍️To shop pottery www.undsethpottery.ca
📷 Follow us on Instagram
www.instagram.com/undsethpottery
😊To watch a live kiln opening on Facebook https://m.facebook.com/100063529236369/
🙌Give through PayPal
https://www.paypal.com/donate/?hosted_button_id=U6Z22VC3MGAAY
#amaco #mayco #ceramic #potteryhandmade #kilnopening #spectrum