The Floating Dust Shoe (The very best dust shoe out there?) VCarve tutorial.

I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here. My DIY Floating Dust Shoe How To video. Music - ”Killers” by Josh Woodward. Free download: http://joshwoodward.com/ VCarve files Link: https://drive.google.com/file/d/1wBwi9Zgam7fdgVvuEAb91LrPzaZhHyQ5/view?usp=sharing Clamp Part Vectors Link: https://drive.google.com/file/d/1xdqbA_x4pCf0pfQvaAHwObA4xLAx6Jkx/view?usp=sharing Middle part Vectors Link: https://drive.google.com/file/d/18V2ClYW_c41ylKX1_sYbmRHOaeWqY-47/view?usp=sharing Brush Part Vectors Link: https://drive.google.com/file/d/1H2HwjpOFSsLGyIl6_60Dg5P0vc9j5vwN/view?usp=sharing All parts in DXF: https://drive.google.com/file/d/1uDDBQ8xXrk6Nk12DYxhoFdN4hp68xeEE/view?usp=sharing Here is links to the Swedish stores were I bought the material for the shoe. You can search on eBay for steering gear boot and door sealing brush or door bottom sweep as well. http://www.biltema.se/sv/Bil---MC/Bilreservdelar/Chassidelar/Fram-och-Bakvagn/Styrvaxeldamask/Styrvaxeldamask-2000019650/ https://www.jula.se/catalog/bygg-och-farg/beslag/fonster-dorrbeslag/tatningslister/dorrtatningslist-319003/ http://www.biltema.se/sv/Bygg/Kemikalier/Lim/Superlim-2000024289/ https://www.clasohlson.com/uk/Neodymium-Magnets-10-pack/31-1467 Tool data for this project. 3mm single flute end mill. Spindle speed 18000 r.p.m. Feed Rate 1800 mm/min. Plunge Rate 900 mm/min Pass Depth 1.5 mm. Stepover 1.2 mm. 6mm Single Flute end mill Spindle speed 18000 r.p.m. Feed Rate 1800 mm/min Plunge Rate 900 mm/min Pass Depth 1.5 mm. Stepover 2.4 mm 90 degree 10 mm V-bit Spindle Speed 18000 r.p.m. Feed Rate 1800 mm/min. Plunge Rate 900 mm/min Pass Depth 1.5 mm. Final Pass Stepover 0.21 mm. Clearance Pass Stepover 2.5 mm